10 Using E-Mail Service
84
Using E-
Mai
l Ser
v
ice
10
■
If [SMTP] has been selected for [E-mail Receive Protocol]
Alias cannot be configured. User can decide the account (the left side of @ mark). The
address (the right side of @ mark) is a combination of host name and domain name.
Example: [email protected]
z
Account name: mymail
z
Host name: myhost
z
Domain name: example.com
■
If [POP3] has been selected for [E-mail Receive Protocol]
Specify POP user name to the account (the left side of @ mark), and POP3 receiving
mail server to the address (the right side of @ mark). User can decide an alias such as
[email protected]
Example: [email protected]
z
Account name: mymail
3
Set the protocol for receiving e-mail.
1) Select [Other Settings].
2) Select [E-mail Receive Protocol] and then select [Change Settings].
3) Select either [SMTP] or [POP3] as appropriate for your environment.
4) Select [Save] and then select [Close].
■
If [SMTP] has been selected for [Mail Receiving Protocol].
1) Select [SMTP Server Settings] and then set the following items for the SMTP
server.
z
[SMTP Server Port Number]
Enter a value in the range from 1 to 65535.
Note
•
Do not use the same number as another port number.
■
If [POP3] has been selected for [Mail Receiving Protocol].
1) Select [POP3 Server Settings] and set then the following items for the POP3
server.
z
[POP3 Server Setup]
Select from [By IP Address] or [By Server Name].
z
[POP3 Server IP Address]
Enter if [By IP Address] has been selected for [POP3 Server Setup].
Note
•
Enter address in the format "xxx.xxx.xxx.xxx". xxx should be a numeric value in the range
from 0 to 255. However, the first xxx cannot be 127 or any value between 224-255.
•
When you make an entry mistake, press the <C> (Clear) button and enter again.
•
When you would like to move to next without entering all 3 digits, select [save/select next].
z
[POP3 Server Name]
Enter if [By IP Address] has been selected for [POP3 Server Setup].
z
[POP3 Server Port Number]
Enter a value in the range from 1 to 65535.
Note
•
Do not use the same number as another port number.
z
[POP3 Server Check Interval]
Set the interval for checking the e-mail on the POP3 server.
