Installation Procedure
31
Inst
a
llat
ion
When Using USB P
o
rt
3
3
Configure the following items as necessary.
z
Print Mode
Configure the print language on the machine to match the received data.
z
PJL
Specify whether to enable PJL.
z
Auto Eject Time
Configure the time that the data so far received by the machine will automatically be
printed since data is no longer sent to the printer.
z
Adobe Communication Protocol
Configure the protocol defining the communication method between PostScript
printers and a host.
4
Select [Close] repeatedly until the [System Settings] screen is displayed.
5
Select [Exit].
6
After the machine is restarted, print out the [Printer Settings List] to confirm that the
USB port is enabled.
7
Connect the USB cable to the machine's USB2.0 interface connector.
For information how to print a setting list, refer to "Print Report/List" in Chapter 12 of the User Guide.
Configuration on Computer
The following describes the configuration procedure for the computer.
In order to print from the machine, the computer needs to have the print driver installed.
For information about the usable operating systems, refer to "Supported operating systems" (P.17).
Refer to the manual contained in the "CentreWare Utilities" or "Driver CD Kit" CD-ROM for the print
driver installation procedure.
You can also print from Macintosh using USB. Refer to the manual contained in the CD-ROM included
with this product for the print driver installation procedure.
