2 Product Overview
26
P
roduc
t O
v
e
rv
ie
w
2
Customizing Control Panel
You can customize the Custom buttons and items on the [All Services] screen.
Assigning a feature to Custom buttons
By assigning a feature to Custom buttons (Copy, Custom 2, and Custom 3), you can
switch to that feature without returning to the [All Services] screen.
The factory default settings for these buttons are, "Copy" for the 1st button, and none
for the 2nd and 3rd buttons. Each button feature can be changed to appear in the All
Services screen by selecting from [Language].
For more information, refer to "Screen/Button Settings" under "Chapter 10 Specification Setups" in the
User Guide.
Attach the labels included in this product when you have changed the assignment. If
you have used a feature for which no label is provided, use a blank label and write down
the feature using a permanent marker and attach it to the appropriate Custom button.
Customizing [All Services] screen
You can customize the types of features and the location of buttons on the [All
Services] screen.
The following shows the factory default settings.
For more information, refer to "Screen/Button Settings" under "Chapter 10 Specification Setups" in the
User Guide.
Note
•
When the feature is not available the button will not be displayed. Also, if the feature is
unavailable due to hardware problems, the button will be grayed out.
z
Copy
z
z
Scan to Mailbox
z
Network Scanning
z
Scan to FTP/SMB
z
Check Mailbox
z
Stored Programming
z
Job Flow Sheets
z
Language
z
Setup Menu
z
Print Mode
Changing feature screen
You can customize the setting screen for the following features on the [All Services]
screen.
z
Copy
z
z
Scan to Mailbox
z
Network Scanning
z
Scan to FTP/SMB
For information about how to change settings, refer to "Print Mode Settings", "Scan Mode Settings" of
"10 System Settings" in User Guide.
