8 Installation When Using EtherTalk
52
In
s
ta
llat
ion
W
h
en Using Et
herTalk
8
Preparations
Prepare the following items to install the machine when using EtherTalk network.
z
A network environment where EtherTalk can be used.
Installation Procedure
Installation Overview
The machine can be connected to computers using EtherTalk network.
The following is the procedure to connect the machine to EtherTalk network.
z
Configuration on the Machine
Setting EtherTalk on the machine.
z
Configuration on the Computer
Installing the print driver.
Configuration on Machine
The following describes the configuration procedure to connect the machine to
EtherTalk network.
Enable the EtherTalk port
Note
•
The configuration can also be performed using CentreWare Internet Services or utilities
included in the "CentreWare Utilities" or "Driver CD Kit" CD-ROM.
Refer to "Using CentreWare Internet Services" (P.55) for how to use CentreWare Internet Services.
1
Display the [System Administrator Menu] screen.
1) Press the <Log In/Out> button.
2) Enter the UserID with the numeric keypad or a keyboard displayed by pressing
[Keyboard], and select [Confirm].
Note
•
The default User ID value is "11111". When using the Authentication feature, a password is
required. The default password is "x-admin".
3) Select [System Settings].
2
Enable the EtherTalk port
1) Select [System Settings].
2) Select [Network Settings].
3) Select [Port Settings].
4) Select [EtherTalk] and select [Change Settings].
5) Select [EtherTalk - Port] and select [Change Settings].
6) Select [Enable] then select [Save].
3
Select [Close] repeatedly until the [System Settings] screen is displayed.
4
Select [Exit].
