Configuration of Network Scanning
101
U
sin
g
Sc
an
Ser
vice
11
Configuring SNMP Port
Configure the transport protocol for the SNMP port using CentreWare Internet
Services.
1
Start a web browser.
2
Enter the machine’s IP address or the Internet address to the address entry column
on the browser, and press the Enter key.
z
Example of the IP address entry
http://192.168.1.1/
z
Example of the Internet address entry
http://myhost.example.com
Note
•
When specifying a port number, add ":" and a port number to the end of the Internet
address.
3
Click the [Properties] tab.
4
Click [Start Port].
5
Select the [UDP] check box under [SNMP].
6
Reflect the values as the machine’s setting values.
1) Click the [Apply New Settings].
2) Enter the System Administrator User ID and password into [User Name] and
[Password], and then click [OK].
Note
•
The default User ID value is "11111" and password is x-admin.
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.
Configuration on Computer
The following describes the configuration procedure for your computer.
Install EasyOperator on your computer when using EasyOperator.
Easy Operator is included in the "CentreWare Utilities" or "Driver CD Kit" CD-ROM provided with the
machine. For information about the installation procedure, refer to the manual contained in the
"CentreWare Utilities" or "Driver CD Kit" CD-ROM.
