Fuji Xerox apeosport-iv C2270, Руководство администратора

Страница: 199 / 673

Print Service Settings
197
T
ools
5
Substitute Tray
When there is no tray containing the paper size selected by the Auto Paper selection, select
whether or not to print with paper loaded in another paper tray. In the event of using a
substitute tray, select the paper size from [Use Larger Size], [Use Closest Size], or [Select
Tray 5].
Note • When documents are printed using emulation such as ESC/P-K and HP-GL/2, the substitute
tray setting is not valid and a message prompting you to load paper displayed on the screen.
„ Display Message
Does not use a substitute tray, but displays a paper loading message.
„ Use Larger Size
Switches to the next larger size of paper than previously selected and prints at the same
magnification.
„ Use Closest Size
Switches to the closest size of paper to previously selected and prints. If necessary, the
image is automatically reduced in size on the paper.
Note • If there is a client specification, the client specification is prioritized.
„ Select Tray 5
Prints using the paper loaded in Tray 5.
Paper Type Mismatch
Set an action to take when the paper type loaded in the paper tray does not match the paper
type specified.
„ Print
Prints using the paper loaded in the tray.
„ Display Confirmation Screen
A confirmation screen appears to ask whether or not to print the job.
If a paper type mismatch occurs during printing, the machine ignores the paper type specified
in the print driver and prints the job on another type of paper loaded in the machine.
„
Display Paper Supply Screen
The [Paper Supply] screen appears, prompting you to load another type of paper in the
selected tray. The job can be printed if you follow the instructions displayed on the screen.
Note • The paper tray setting is automatically changed to the paper tray displayed on the screen if
paper type mismatch occurs when [Display Paper Supply Screen] is selected, and you
change the paper following the instruction on the screen.
Unregistered Forms
Set whether or not to print a job if a form specified for printing in a form data file (overlay
printing) is not registered on the machine. If you specify [Print], only the data is printed
because the specified form is not present.
The setting is added to the print settings menu when there is a print specification from the
host computer.
Resume Job After Print Error
Set whether or not to automatically cancel a print job when the print job was suspended
because of an error.
Note • The machine will enter the off-line state to restrict subsequent print jobs.
„ Job Resumes Automatically
Automatically cancels the print job to print subsequent jobs.