Foma PushTalk SH902i, Руководство пользователя

Страница: 482 / 568

480
Data
Co
mmu
n
icat
io
n
S
e
n
d
in
g
an
d
Recei
vi
n
g
Data
J
Devices required for data
communication (OBEX)
To perform data communication, downloading OBEX-
compliant data transfer software from the Internet
(
n
P. 522), and installing this software to your PC is
necessary. Refer to the software manual for
information on operating environment and installation
methods. In addition, installation of the FOMA SH902i
Communication setting file (
n
P. 457 to P. 459) is
necessary beforehand.
A FOMA USB cable is required to connect the FOMA
terminal to a PC.
Send data from a PC to a FOMA terminal one item at a
time.
Sending one item at a time from a FOMA terminal to a
PC is not possible.
Data transfer operating methods differ depending on
the software used. Refer to the software manual for
details.
1
Send data from a PC using data
transfer software (Write 1).
Refer to the software manual for details on
sending data.
Send and receive all data at once, between a PC and
the FOMA terminal.
“Write all” and “Read all” operations require data
transfer software and your FOMA terminal
authentication password.
Data transfer operating methods differ depending on
the software used. Refer to the software manual for
details.
1
Send data from a PC using data
transfer software (Forward all).
Refer to the software manual for details on
sending data.
Entering your authentication password on the
PC will be necessary.
Enter your authentication password (four digits).
2
Enter terminal security code (four to
eight digits) and the authentication
password (four digits).
3
Start data transmission.
During Ir exchange, melodies, still pictures, i-motion
or PDF files with restrictions for mail attachment and
output from the FOMA terminal cannot be sent.
However, still pictures and movies shot with the built-
in camera can be sent even if File restriction is set to
Restricted .
Mail with i-
α
ppli start up designations can be sent
after attached data has been deleted.
Attached JPEG images 10,001 bytes or more or 500
KB or less are deleted and only message is sent.
Data such as phonebook entries cannot be sent or
received while All lock (
n
P. 159), or Self mode
(
n
P. 162) is set. Data of locked functions cannot
be sent or received while PIM is locked
(
n
P. 163).
Phonebook data cannot be sent or received when
Keypad dial lock (
n
P. 164) is set.
Depending on data size, data communication may
take some time. In addition, the FOMA terminal
may not be able to receive data due to data size.
When receiving phonebook data, data will be
added from memory number
010 for single entry, or
in accordance with memory number information
when receiving all entries.
When receiving all phonebook entries, Owner
information (excluding first phone number)
registered in Own number will be overwritten.
Phonebook entries are sent in memory number order.
When sending all phonebook entries, Owner
information from own number screen is also sent.
PDF files which exceed 1.2 MB cannot be sent.
Note
The FOMA terminal data communication (OBEX)
function conforms with IrMC1.1. However,
depending on the function, some data may not be
sent or received even when the other party’s
terminal complies with IrMC1.1.
Sending Single Data Item (Write 1)
Note
Note
When phonebook data is sent (from a PC to the
FOMA terminal handset) one entry at a time,
entries are saved to the smallest available memory
number from
010 to 749 . If all memory numbers
from 010 to 749 are already used, entries are
saved to the smallest available memory number
between
000 and 009 .
When phonebook data is received and 750 entries
(names, phone numbers, or mail addresses) are
already registered, or more than 750 entries have
been registered, a message appears notifying that
no further entries can be saved.
Sending All Data (Write All/Read All)
Note
Performing Write all from a PC to your FOMA
terminal replaces all data stored in the FOMA
terminal. All data previously stored in your FOMA
terminal will be deleted. This includes phonebook,
Schedule, and protected mail data saved as secret
data.
If an error occurs during data transmission from a
PC to the FOMA terminal, all data stored in the
FOMA terminal may be deleted. Check the cable
connection, the FOMA terminal battery level, and
the PC power supply before performing Write all.
Performing operations while charging the FOMA
terminal in the desktop holder is recommended.
Depending on the connected device, the
transmission status (bar display) may not appear.
dv30̲e.book Page 480 Tuesday, November 22, 2005 3:21 PM