Foma PushTalk SH902i, Руководство пользователя

Страница: 474 / 568

472
Data
Co
mmu
n
icat
io
n
S
e
tti
n
g
s w
ith
o
u
t F
O
MA PC
S
e
tu
p
So
ft
w
a
re
2
Set either Send caller ID (186) or
Not send caller ID (184) during
packet transmission.
Enter in the format: “AT
*
DGPIR=<n>”.
(
n
P. 483)
AT
*
DGPIR=1
o
:
Adds “184” when packet transmission is
established with the host (APN).
AT
*
DGPIR=2
o
:
Adds “186” when packet transmission is
established with the host (APN).
3
Confirm that OK appears.
J
Send/Not send setting on dial-up
networks
Adding “186” (Send) and “184” (Not send) to the
host number in dial-up networks is also possible.
Setting “186” (Send) and “184” (Not send) in both
the
*
DGPIR command setting and the dial-up
network setting results in the following.
Enter “AT
*
DGPIR=0” to return “186” (Send)/“184” (Not
send) to Not set (default setting).
Set Send for sending caller ID when using mopera U
or mopera, the DoCoMo Internet Connection Service.
Set the host and TCP/IP protocol. Contact the
Internet service provider or network administrator
for more information on settings.
J
Hosts
For packet transmissions, set the host (APN) in
advance. Register numbers (cid) 1 to 10 for the
host (APN) in advance, to enable using packet
transmission by specifying control numbers. Host
(APN) settings are the equivalent to a phonebook
for packet transmissions on a PC. Compared to
normal phonebook entries, they appear as
follows.
For example, when the mopera host (APN),
mopera.ne.jp , is registered for cid1, connecting
to mopera is possible by specifying the host
number “
*
99
***
1#”. Other registered cids can be
used similarly.
*
99
***
1# : Connects to host (APN) registered
to cid1.
Alternatively, connect with just
*
99#.
*
99
***
2# : Connects to host (APN) registered
to to cid2.
*
99
***
10# : Connects to host (APN) registered
to cid10.
As the default setting, mopera.ne.jp , the APN
used to connect to mopera is registered for cid1,
and
mopera.net , the APN used to connect to
mopera U is registered for cid3. When connecting
to a corporate LAN or Internet service providers
other than mopera or mopera U, register the host
(APN) using cid2 or cid4 to 10. (
n
P. 471)
For 64K data communications, enter the access
point phone number supplied by the Internet
service provider or network administrator.
Contact the Internet service provider or network
administrator for more information on settings.
Access point phone number is “
*
8701” for mopera U
and “
*
9601” for mopera when using 64K data
communications.
When using packet transmissions, enter “
*
99
***
3#”
for mopera U and “
*
99
***
1#” for mopera. (Default
setting)
Dial-up network
setting
(when <cid>=1)
Using the
*
DGPIR command
Send/Not send
setting
Send/Not send
caller ID
*
99
***
1# Not set
(default setting) Send
Not send Not send
Send Send
184
*
99
***
1# Not set
(default setting) Not send
(dial-up network
“184” is given
priority)
Not send
Send
186
*
99
***
1# Not set
(default setting) Send
(dial-up network
“186” is given
priority)
Not send
Send
Setting the Dial-up Network
In phonebook
In Packet transmission
setting
Registered number
(memory number) Control numbers (cids) 1 to
10
Other party’s name Host name (host (APN))
Other party’s phone
number
*
99
***
<cid>#
dv30̲e.book Page 472 Tuesday, November 22, 2005 3:21 PM