Foma PushTalk SH902i, Руководство пользователя

Страница: 438 / 568

436
＊
miniSD Memory Cards are sold separately. (
n
P. 376)
Ot
he
r U
s
e
fu
l Func
tions
Set Au
to
An
sw
er
Making Videophone calls is not available from switch.
The default setting is OFF .
1
In stand-by, press
t62
and
press
1
[ON].
2
Enter memory number (three digits:
000 to 749) and press
t
.
Earphone/Microphone auto calling is set.
1
Connect flat-plug earphone/
microphone with switch.
Insert plug of flat-plug earphone/microphone
with switch into earphone/microphone terminal.
2
In stand-by, press switch for 2+
seconds.
The phone number for the memory number set
for earphone/microphone auto calling is dialed
automatically.
If multiple phone numbers are saved for memory
number set for earphone/microphone auto
calling in the phonebook, the first phone number
saved is called. If the slot for the first phone
number is empty, then the second phone number
is called. If the slot for the second phone number
is empty, then the third phone number is called.
3
Press switch for 2+ seconds to
finish call.
The call is disconnected. (Alternatively, press
H
on FOMA terminal to disconnect.)
1
Connect flat-plug earphone/
microphone with switch.
Insert plug of flat-plug earphone/microphone
with switch into earphone/microphone terminal.
2
Ring tone sounds when call is
received.
Ring tone sounds from the device set for Ring
output (
n
P. 133).
3
Press switch for 2+ seconds.
Call is connected. (Alternatively, press
s
on
FOMA terminal to connect.)
When a Videophone call is received while the
FOMA terminal is closed, press switch to send
image set in Substitute image (
n
P. 89). If the
FOMA terminal is open, the camera image is
sent.
4
Press switch for 2+ seconds to
finish call.
The call is disconnected. (Alternatively, press
H
on FOMA terminal to disconnect.)
Automatically connect voice/Videophone/
PushTalk calls received while flat-plug
earphone/microphone with switch (sold
separately) is connected.
Set time before voice/Videophone call is automatically
connected (Receive time).
Auto answer set is not available (excluding PushTalk)
when flat-plug earphone/microphone with switch is not
connected.
The default setting is OFF .
1
In stand-by, press
t632
.
Alternatively, select
_
(Settings)
→
Phone
settings
→
Incoming settings
→
Set auto
answer from Top menu.
Making Voice Calls with Switch
Note
When a memory number set for earphone/
microphone auto calling is set as Secret, set Secret
mode to
ON before using switch to call.
Calls may be placed accidentally if FOMA terminal
is carried in bags with flat-plug earphone/
microphone with switch connected. Disconnect
when not in use.
Calls cannot be placed while phonebook PIM is locked.
Calls may be placed if earphone/microphone
without switch is rapidly inserted and removed.
Keypad sounds are output to flat-plug earphone/
microphone with switch when connected.
The volume for earphone is the same as set in
Earpiece volume (
n
P. 66).
Answering Calls with Switch
Note
Call may be answered accidentally if connected
while ring tone is ringing. Disconnect when not in
use.
Do not press switch repeatedly. Call may be placed
and received automatically.
Do not wind cord for flat-plug earphone/
microphone with switch around FOMA terminal
handset. Internal antenna may not work properly.
Placing cord for flat-plug earphone/microphone
with switch near internal antenna causes noise.
Secure plug. Sound may not be audible if not
completely inserted.
A beep sounds when plug is inserted only halfway
during a call. This is not a malfunction.
A pop may sound when power is turned on. This is
not a malfunction.
Set Auto Answer
Answering Calls
Automatically with Earphone
dv30̲e.book Page 436 Tuesday, November 22, 2005 3:21 PM