Foma PushTalk SH902i, Руководство пользователя

Страница: 452 / 568

450
Netw
o
rk
Se
rv
ices
S
et
Arri
val
Act
J
Available actions
To use Call Waiting, set Arrival call act to Answer .
No matter the Arrival call action setting, if a call is
received while engaged in another call it is saved in
Received calls.
The default setting is Answer .
1
In stand-by, press
t49
and
select an arrival action.
Alternatively, select
_
(Settings)
→
NW Services
→
Arrival call act from Top menu.
Set arrival actions to Activate to receive
another voice call according to Arrival call act
(
n
P. 449) during a call.
Manually connect incoming voice calls to Voice Mail
Service or Call Forwarding Service.
Cannot be set from outside the service area.
The default setting is Deactivate .
To set arrival actions, subscription for Voice Mail
Service or Call Forwarding Service is required.
1
In stand-by, press
t481
,
select Yes and press
t
.
Alternatively, select
_
(Settings)
→
NW Services
→
Set arrival act
→
Activate from Top menu.
Arrival action is activated and a message appears.
1
In stand-by, press
t482
,
select Yes and press
t
.
Alternatively, select
_
(Settings)
→
NW
Services
→
Set arrival act
→
Deactivate from
Top menu.
Arrival action is deactivated and a message
appears.
1
In stand-by, press
t483
.
Alternatively, select
_
(Settings)
→
NW
Services
→
Set arrival act
→
Status request
from Top menu.
Current settings appear.
Set Voice Mail Service and Call Forwarding
Service remotely from landline phones, NTT
payphones and DoCoMo mobile phones.
Remote control is also available from outside
the FOMA service area.
To perform remote operations, set Remote
control to
Activate in advance.
Cannot be set from outside the service area.
Set to activate remote control.
1
In stand-by, press
t511
,
select Yes and press
t
.
Alternatively, select
_
(Settings)
→
Another
NW Services
→
Remote control
→
Activate
from Top menu.
Remote control is activated and a message
appears.
Set to deactivate remote control.
1
In stand-by, press
t512
,
select Yes and press
t
.
Alternatively, select
_
(Settings)
→
Another
NW Services
→
Remote control
→
Deactivate
from Top menu.
Remote control is deactivated and a message
appears.
Voice mail Voice calls received while engaged in a
call are automatically forwarded to Voice
Mail Service center. Messages are
stored regardless of Voice Mail Service
settings.
Call
forwarding Voice calls received while engaged in a
call are automatically forwarded. Voice
calls received while engaged in a call are
automatically forwarded regardless of
Call Forwarding Service settings.
Call rejection Voice calls received while engaged in a
call are automatically rejected.
Answer Follows Call Waiting settings if activated.
If deactivated, one of the following
applies.
Disconnect current voice call and
answer incoming voice call.
Manually connect incoming voice calls
to Voice Mail Service, Call Forwarding
Service, or reject.
Voice Mail Service and Call
Forwarding Service settings are used
if set to
Activate .
Voice Mail Press
1
.
Call forwarding Press
2
.
Call Rejection Press
3
.
Answer Press
4
.
Note
Settings are not applied during Videophone calls,
when receiving Videophone call or when receiving
64K data communications.
Set Arrival Act
Activating/Deactivating
Arrival Actions
Activating Arrival Actions
<Activate>
Deactivating Arrival Actions
<Deactivate>
Checking Settings
<Status Request>
Remote Control
Setting Remote Control
Activating Remote Control
<Activate>
Deactivating Remote Control
<Deactivate>
dv30̲e.book Page 450 Tuesday, November 22, 2005 3:21 PM