Foma PushTalk SH902i, Руководство пользователя

Страница: 481 / 568

479
Data
Co
mmu
n
icat
io
n
S
e
n
d
in
g
an
d
Recei
vi
n
g
Data
3
Double-click the connection icon.
The connection screen appears.
Select the host icon and then select
接続
(Connect) in the
接続
(Connect) menu to
display the connection screen.
4
Confirm the settings and click
接続
(Connect).
The FOMA is connected to the host.
The phone number set in “Setting the Dial-up
Network” (
n
P. 472) appears in the
電話番号
(Phone number) field.
When using mopera U or mopera, user name
and password can be left blank.
J
Disconnecting
Simply closing the browser may not disconnect
the connection. Follow the steps below to
properly disconnect.
Double click in the task tray and
click
切断
(Disconnect).
The connection is disconnected.
The FOMA terminal has OBEX as a data
communication protocol. OBEX data communication
enables sending and receiving phonebook, owner
information from the Own number screen, Schedule,
ToDo list, sent mail (including SMS), received mail
(including SMS), unsent mail (including SMS), text
memos, melodies, My picture, i-motion, My Documents,
and bookmark data to and from a PC. The FOMA
SH902i is also equipped with an Ir exchange function.
Send and receive phonebook entries or data from
received mail to/from other FOMA terminals also
equipped with the Ir exchange function.
Also, transfer data using miniSD Memory Card.
(
n
P. 522)
Use the following three types of data communication
with the FOMA terminal.
Send data one item at a time, from a PC to a FOMA
terminal (Write 1).
Send data in bulk, from a PC to a FOMA terminal
(Write all).
Send data in bulk, from a FOMA terminal to a PC
(Read all).
During data communication, the handset will be
outside the service area, and functions such as voice/
Videophone call, i-mode, i-mode mail, and packet
transmission will not be available.
Even after completion of data communication,
A
(outside the service area) may be displayed for a short
time.
Sending and Receiving Data
(OBEX)
Sending/Receiving FOMA Terminal
Data to/from a PC
Note
Make sure the FOMA terminal is properly
connected to the PC. If not connected properly,
sending and receiving data may not be possible, or
data may be lost.
Fully charge the FOMA terminal and check whether
there is enough remaining battery power. If data
communication is performed when the battery level
is low or empty, sending and receiving data may
not be possible, or data may be lost. Performing
operations while charging the FOMA terminal in the
desktop holder is recommended.
Check the PC power supply as well. If not turned
on, sending and receiving data may not be
possible, or data may be lost.
Perform data communication with the FOMA
terminal in stand-by. When movie/i-motion is set as
the stand-by display, stop movie/i-motion playback
before performing data communication.
During communication (voice/Videophone call, and
data communication), data cannot be sent or
received. Also, when sending and receiving data,
other data communication cannot be performed.
However, receiving a call, right after data
communication has begun, may be possible. In such
cases, the sending or receiving of data is canceled.
FOMA card phonebook data cannot be sent.
dv30̲e.book Page 479 Tuesday, November 22, 2005 3:21 PM