Foma PushTalk SH902i, Руководство пользователя

Страница: 63 / 568

61
Cal
lin
g
/Recei
vi
n
g
R
e
c
o
nne
c
t C
o
nt
rol
Calls may be disconnected in areas with weak signals such as inside tunnels or areas
surrounded by buildings. If signal strength immediately becomes better, the call is
automatically reconnected. An alarm sounds when reconnecting.
Alarm settings are Alarm on(high) , Alarm on(low) and No alarm .
Reconnect control is also available for Videophone calls and PushTalk transmissions.
Reduce the surrounding noise to make conversations clearer.
Noise reduction is also available for Videophone calls.
Use the FOMA In-car hands-free kit 01 (sold separately) to connect hands-free devices such as
car navigation to the FOMA terminal, and make/receive voice/Videophone calls from the device.
Refer to the user’s guide of each product for more details. Use a FOMA In-car hands-free
cable 01 (sold separately) for the in-car hands-free kit 01 (sold separately).
Reconnect Control
Default setting
Alarm on(high)
Reconnecting Disconnected Calls
Automatically
1
In stand-by, press
t612
and select an alarm tone.
Alternatively, select
_
(Settings)
→
Phone settings
→
In-call settings
→
Reconnect from Top menu.
Note
Amount of time that can elapse to reconnect varies depending on signal strength. The estimated time is
approximately ten seconds.
The other party hears no sound until the call is reconnected (up to ten seconds). The call is charged during
this time.
Noise Reduction
Default setting
ON
Reducing Noise Interference to Hear
Calls Clearly
1
In stand-by, press
t611
and
1
[ON].
Alternatively, select
_
(Settings)
→
Phone settings
→
In-call settings
→
Noise reduction from Top menu.
Note
It is recommended that this function be kept set to ON .
Noise reduction processes sound to make conversations clearer. Sound quality may vary depending on
surrounding noise and tone of the voice.
Hands-free
Using Handset in a Car
Note
Functions such as display settings, ring tones and Public mode (Drive mode) call functions follow FOMA
terminal settings for incoming calls.
If hands-free device has sound enabled, device plays ring tone even when FOMA terminal is set to Manner
mode or
Silent .
When a Videophone call is made from the phonebook or Redial, transmission speed follows device
settings. When speed is not set, Videophone calls are made at 64K.
When a Videophone call is made or received with the FOMA terminal closed using a hands-free
compatible device, substitute image is sent to the other party.
To set alarm to high Press
1
.
To set alarm to low Press
2
.
To set alarm to off Press
3
.
dv30̲e.book Page 61 Tuesday, November 22, 2005 3:21 PM