Foma PushTalk SH902i, Руководство пользователя

Страница: 472 / 568

470
Data
Co
mmu
n
icat
io
n
S
e
tti
n
g
s w
ith
o
u
t F
O
MA PC
S
e
tu
p
So
ft
w
a
re
J
Loading settings from a file
To load saved host (APN) settings in order to re-
edit them or write them onto the FOMA terminal,
select the appropriate function from the
ファイル
(File) menu on the toolbar.
J
Writing host (APN) information onto
the FOMA terminal
To write the indicated host (APN) setting to the
FOMA terminal, click
FOMA
端末へ設定を書き込
む
(Write settings onto FOMA terminal) on the
Host (APN) setting screen.
J
Creating dial-up settings
On the host (APN) settings screen, select an added
or edited host (APN) and click
ダイヤルアップ作成
(New dial-up). A screen confirming the writing of
the setting to the FOMA terminal appears. Click
は
い
(Yes). After the setting is written to the host
(APN), the New dial-up for packet transmission
screen appears.
Enter a connection name and click
アカウント・パ
スワードの設定
(Set account and password). (Can
be left blank when using mopera U and mopera.)
Enter a user name and password (in Windows XP
and 2000 Professional, specify the users to whom
rights are granted) and click
OK .
If the IP and DNS information from your provider
are available, click
詳細情報の設定
(Advanced),
enter the necessary information and click OK .
After entering the information, click FOMA
端末へ
設定を書き込む
(Write settings onto FOMA
terminal), confirm that the old setting is to be
overwritten and then write the settings.
This section describes how to set up packet
transmission and 64K data communications
without using the FOMA PC Setup Software.
To make the settings, communication software for
entering AT commands are required. “Hyper
Terminal”, which is included as standard with
Windows, is used here.
The flow for setting up with use of AT commands is as
follows.
To use 64K data communications, there is no host
(APN) setting.
Set the host (APN) for using packet transmission.
Register up to 10 numbers. Hosts are managed
using cid numbers from 1 to 10 (
n
P. 471).
The default setting for the first cid is
mopera.ne.jp , the APN used to connect to
mopera. The setting for the third cid is
mopera.net , the APN used to connect to mopera
U. Save hosts (APN) to cid2 or 4 to 10.
The registered cid is the connection number set in the
dial-up connection settings.
Contact the Internet service provider or network
administrator for hosts (APNs) other than mopera.
Example: For Windows XP
1
Connect the FOMA terminal to your
PC.
2
Select
スタート
(Start) menu
→
すべ
てのプログラム
(All Programs)
→
ア
クセサリ
(Accessories)
→
通信
(Communications)
→
ハイパーター
ミナル
(Hyper terminal).
Hyper terminal starts up.
For Windows 2000 Professional and Me
Select
スタート
(Start) menu
→
プログラム
(Programs)
→
アクセサリ
(Accessories)
→
通
信
(Communications)
→
ハイパーターミナル
(Hyper terminal).
Communication Settings
without the FOMA PC Setup
Software
Setting Communications for Packet
Transmissions and 64K Data
Communications
Note
Install communication setting file before making
settings for packet transmission and 64K data
communications. (
n
P. 457)
AT commands are commands for controlling the
modem. The FOMA terminal is compliant with AT
commands and also supports some extended
commands, as well as some unique AT commands.
Making host (APN) settings is not necessary when
using mopera U or mopera, the DoCoMo Internet
Connection Service, since it is set as the default.
Set Notify caller ID as necessary. (When using
mopera U or mopera, set
Send .) The default
setting is Not send .
Set other settings as necessary. Use is possible
with the default settings.
Setting the Host (APN)
Start up communication software that supports AT
commands (steps 2 to 5)
Set the Dial-up
Network
(
n
P. 472)
End communication software (
n
step 7 on P. 471)
Set the host
(APN)
(
n
steps 6 and
7 on P. 471)
Send/Not send
caller ID
(
n
P. 471)
dv30̲e.book Page 470 Tuesday, November 22, 2005 3:21 PM