Foma PushTalk SH902i, Руководство пользователя

Страница: 489 / 568

487
Data
Co
mmu
n
icat
io
n
AT
Co
mman
d
L
ist
ATS0=<n>
[M]
Sets number of rings before
FOMA terminal automatically
receives.
*1
n=0: No automatic receiving (Default setting)
n=1 to 255: Automatically receives after sets
number of rings
ATS0=0
o
OK
ATS2=<n>
[M]
Sets the escape character. n=0 to 127 (default setting: n=43)
When n=127 is set, escape is disabled. ATS2=43
o
OK
ATS2?
o
043
OK
ATS3=<n>
[M]
Sets the carriage return (CR)
character. Defines the character used to recognize the
end of a AT command character string.
Appended to the end of the echoed command
character string and result code. The settings
cannot be changed (default setting: n=13). ATS3=13
o
OK
ATS3?
o
013
OK
ATS4=<n>
[M]
Sets the line feed (LF) character. Appended after the CR character, when result
codes are displayed as text. The settings
cannot be changed (default setting: n=10). ATS4=10
o
OK
ATS4?
o
010
OK
ATS5=<n>
[M]
Sets the backspace (BS)
character. When detected while entering an AT
command, the last character in the input
buffer is deleted. The settings cannot be
changed (default setting: n=8). ATS5=8
o
OK
ATS5?
o
008
OK
ATS6=<n>
[M] Sets pause time (seconds) until
dialing. Sets a register, but has no other effect.
n: 2 to 10 (default setting: n=5) ATS6=10
o
OK
ATS7=<n>
[M]
Sets connection timeout time
(seconds).
*1
n: 1 to 255 (default setting: n=60)
When establishing 64K data communications or
packet transmission, if the FOMA terminal cannot
send “CONNECT” signal to the PC within the set
number of seconds after receiving ATD input from
the PC, it returns a “NO CARRIER” result, and
proceeds to disconnect. If the value is set between
121 and 255, the “OK” result is returned, but the
timeout time is set to 120. ATS7=60
o
OK
ATS8=<n>
[M]
Sets pause time (seconds) until
comma dialing. Sets a register but does not affect the pause
time (3 seconds).
n=0 : Does not pause
n: 1 to 255 (default setting: n=3) ATS8=3
o
OK
ATS10=<n>
[M]
Sets the delay time (seconds) for
automatic disconnection
(1/10 seconds).
*1
Sets a register, but has no other effect.
n: 1 to 255 (default setting: n=1) ATS10=1
o
OK
ATS30=<n>
[M]
Disconnects when no data is sent/
received for at least this amount of
time. Only valid during 64K data communications.
<n> is set in minutes.
n: 0 to 255 (default setting: n=0)
n=0 sets inactive timer off. ATS30=3
o
OK
ATS103=<n>
[M]
Sets delimiter used when adding
an incoming sub-address to
number dialed. Only valid during 64K data communications.
n=0:
*
Asterisk
n=1: /Slash (default setting)
n=2: ¥Yen mark or backslash
ATS103=0
o
OK
ATS104=<n>
[M]
Sets delimiter used when adding
an outgoing sub-address to
number dialed. Only valid during 64K data communications.
n=0: #Pound sign
n=1: %Percent symbol (default setting)
n=2: &Ampersand ATS104=0
o
OK
AT Command Overview Parameter/Explanation
Execution
Example
dv30̲e.book Page 487 Tuesday, November 22, 2005 3:21 PM