Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
19
6.4.2
Plant Settings - System settings - Strander
Figure 11: Basic setting - System settings - Strander
These settings refer to specific settings of the strander. You can assign a name for the
plant here. It will be used, for example, when creating quality protocols.
At this point, you can also enter the name and number of the lay-plate(s). To add a new
one, click the control.
and assign a unique name.
To delete a lay-plate from the list, select the row in the table and click
.
6.4.3
Basic setting — System settings — RTM Tension monitoring
Figure 12: Basic setting - System settings - RTM Tension monitoring
In the “RTM Receivers and Extensions” table, you first define the number and name of
the RTM X42 receiver modules. Additionally, you assign a lay-plate, an IP address and
the number of connected extension modules to each receiver module.
In the “Force Sensors” table, you assign the corresponding force sensors to the lay-
plates defined during the previous step.
The input is performed as in a traditional spreadsheet program. You do not need to save
the input or change of a value. In the case of incorrect inputs, a corresponding notice
will be displayed.
1
2
