Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
23
Series
Select the exact series of the brake actuators in your machine here.
Device ID
The radio frequency of each brake actuator is clearly defined by the
ID. You can find it on a sticker on the respective brake actuator.
The ID is assigned at the factory.
Refer to the Installation and Operating Manual RTMX42.BC Brake
Control
Table 6: Basic setting - System settings - RTM Brake Control
6.4.6
Basic settings — force sensors and relays
This is where you perform the settings for the force sensors.
Figure 15: Basic setting - Force sensors and relays
Basic setting — Force sensor and relay
Column Description
Name
Name of the force sensor
Lay-plate
Name of the lay-plate
Nominal force
The nominal force of the deployed force sensor. The
nominal force of a force sensor can be found on the
nameplate. The input is performed in Newton
Offset
Free entry of zero shift or automatic calculation
refer to Offset compensation p. 25f
Min. -9999
Max. 9999
