Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
40
7.1.9
Actual value of the braking force in the brake actuator
Each brake actuator has an integrated force sensor for the direct measurement of the
braking force in the brake actuator.
Differentiation of braking force — strand tension
The two displayed force values “Braking force” and “Strand
Tension” shall be considered independently.
The linking only occurs only when the automatic control is
activated. Only when the machine is running and data recording is
activated, does a deviation of the strand tension from the reference
value lead to a change in the braking force.
Figure 30: bar graph brake actuator
7.1.10
Braking force in the brake actuator as a graphic display
The current value of the braking force is displayed herein graphically. Depending on the
configuration of the brake actuator, a maximum permitted braking force is automatically
defined.
Figure 31: detail view brake actuator
