Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
55
10
Recording
Since data recording is not always required, the FMS Monitoring & Control software
offers the possibility to start it separately.
AUTOMATIC WIRE TENSION CONTROL
With the start of the recording, you also start the automatic strand
tension control in a closed loop.
This control element is used to start data recording.
Figure 41: Recording locked, inactive and activated
After starting the data recording, the following dialogue window appears. These data
appeared in the section "Quality" as properties of data recording. They can also partially
be found in the header of the quality log.
Figure 42: Recording - Dialogue window "Details Data Recording"
3
1
2
4
5
