Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
18
6.4
Basic settings
6.4.1
Global settings
Figure 10: Basic settings - Global settings
You can display or hide page navigation by pressing “>” or “<”.
Basic setting — Global settings
Position Description
1 Page
navigation
2
Global settings
Language — Setting the interface language (German or English)
Force unit — Newton (N) or Pound force (lbf)
Length unit — Meters (m) or Inches (in)
Force gauge accuracy — Number of displayed decimals
Length display accuracy — Number of displayed decimals
3
Main computer (control station)
This is the MAC address of the only computer where data recording
can be started.
Typically, the MAC address of the central computer unit of the RTM
X42.CC Control Center is used, as it is usually located at the control
station.
4
Company information
These entries refer to your company. They will be used later in the
creation of quality protocols.
Table 4: Basic settings - Global settings
2
4
1
3
