Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
34
7.1.2
Channel group
Single channels can be grouped together in a channel group. This is useful for extensive
systems with many channels, as it provides for a better overview.
For minor systems with a few channels, we recommend creating at least two channel
groups. A channel group for measuring and controlling the strand tension and a
separate channel group indicating the measurement and control parameters for the
core.
A channel group with all (known) channels is implemented at the factory. To change the
name of the existing channel group, simply click on the name and assign a unique
name. If you click outside the input field, the changes will be applied.
To implement a new channel group, hover over the name of the existing channel group,
right-click and select "Insert New Channel Group".
Drag & Drop - Channels and Channel Groups
To change the order of channels within a channel group or to
transfer channels from one channel group to another, hover over
the channel name, press and hold down the left mouse button. Now
you can drag the channel and drop it in any place. For this purpose,
simply release the mouse button.
Channel groups can also be moved according to the same principle.
Figure 22: Drag & Drop - Channels Figure 1: Drag & Drop - Channel group
7.1.3
Context menu channel group
Right-click the bar of a channel group to open the channel group context menu.
Figure 23: Channel group context menu
