Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
14
6
Software interface
6.1
Launch of the FMS Monitoring & Control Software
The FMS Monitoring & Control software can be started on all computers on which a
browser is installed. The RTM X42.CC Control Center must be connected to the
corporate network.
In the central computer unit, proceed as follows:
-
Start the central computer unit
-
Log on with user “RTM” and the password “rtm1”
-
A shortcut “RTM Monitoring & Control Software” is already created on the desktop,
which directly starts the browser, together with the software.
Tension monitoring without brake control components
This Operating Manual describes the full functionality of the
software. If you have not installed brake actuators, the controls and
input fields are displayed in grey.
The corresponding settings cannot be changed.
