Operating Manual RTM X42.CC Control Center, RTM Monitoring & Control Software
19.03.2019
5
This device complies with the FCC rules Part 15, as well as the
approved RSS standard(s) issued by Canada. The operation is
subject to the following two conditions:
-
This device may not cause harmful interference; and
-
This device must accept any received interference,
including interferences which are liable of causing
undesirable operation
Information on radio frequency radiation
This device complies with the FCC thresholds for an uncontrolled
environment. This device should be installed and operated in such a
way that a minimum distance of 20 cm between the radiation
source and your body is maintained. This transmitter must not be
operated near or in conjunction with any other antenna or
transmitter
The function of the system is only guaranteed with the specified
arrangement of the components to each other. Otherwise, severe
malfunctions may occur. Therefore, the installation instructions on
the following pages must be adhered to.
The local installation regulations are implemented to ensure the
safety of electrical installations. They are not included in this
Operating Manual. However, they must be observed in any case.
Inadequate grounding can cause electrical shocks to people,
malfunctions of the entire system or damage to the control
electronics! In any case, adequate grounding must be ensured.
It is crucial to compensate for the centrifugal forces generated by
the rotation of the stranding machine. Force-measuring rollers
which have not been compensated, result in incorrect
measurements.
Electrical connections must be implemented by a skilled person.
All system components are sensitive components and may suffer
damage in the event of improper installation! The installation must
be performed by trained service personnel!
