Fluke 5820A, Руководство оператора

Страница: 24 / 272

5820A
Operators Manual
1-10
1-11. General Specifications
Warmup Time Twice the time since last warmed up, to a maximum of 30 minutes
Settling Time 5 seconds or faster for all functions and ranges
Standard Interfaces IEEE-488 (GPIB), RS-232
Operating: 0 °C to 50 °C
Calibration (tcal): 15 °C to 35 °C
Temperature
Performance
Storage: -20 °C to 70 °C
Electromagnetic
Compatibility Designed to operate in Standard Laboratory environments where the Electromagnetic
environment is highly controlled. If used in areas with Electromagnetic fields >1 V/m,
there could be errors in output values. From 80 – 252 MHz, the current output is
susceptible to a field strength of > 0.165 V/M.
Temperature Coefficient Temperature Coefficient for temperatures outside tcal ± 5 °C is 0.1X/°C of 1-year
specification.
Operating: < 80 % to 30 °C, < 70 % to 40 °C,< 40 % to 50 °C
Relative Humidity
[1]
Storage: < 95 %, noncondensing
Operating: 3,050 m (10,000 ft) maximum
Altitude
Nonoperating: 12,200 m (40,000 ft) maximum
Safety Designed to comply with IEC 1010-1 (1992-1); ANSI/ISA-S82.01-1994; CAN/CSA-
C22.2 No. 1010.1-92
Output Impedance The 5820A is designed to drive both 50
e
and 1 M
e
loads
Analog Low Isolation 20 V
EMC Complies with EN 61326-1
Line Voltage (selectable): 100 V, 120 V, 220 V, 240 V
Line Frequency: 47 to 63 Hz
Line Power
Line Voltage Variation: ± 10 % about line voltage setting
Power Consumption 250 VA
Height: 17.8 cm (7 inches), standard rack increment, plus 1.5 cm (0.6 inch) for feet on
bottom of unit.
Width: 43.2 cm (17 inches), standard rack width
Dimensions
Depth: 47.3 cm (18.6 inches) overall
Weight 20 kg (44 pounds)
Absolute Uncertainty
Definition The 5820A specifications include stability, temperature coefficient, linearity, line and
load regulation, and the traceability of the external standards used for calibration. You
do not need to add anything to determine the total specification of the 5820A for the
temperature range indicated.
Specification Confidence
Interval 99 %
[1] After long periods of storage at high humidity, a drying out period (with the power on) of at least one week may be required.