Flexim FLUXUS F401, Руководство по эксплуатации

Страница: 84 / 160

13 Outputs
13.1 Installation of a binary output
FLUXUS F401
2020-06-12, UMFLUXUS_F401V2-1EN
84
Assignment of a source item
One source item has to be assigned to each selected output.
• Select the physical quantity (source item) to be transmitted to the binary output by the
source channel.
• Press ENTER.
The source items and their scroll lists are summarized in the following table.
Function test of the binary output
The function of the output can now be tested.
• Connect an external measuring instrument to the terminals of the output.
• Select Opto-Relay OFF in the scroll list Output Test to test the de-energized state
of the output.
• Press ENTER. Measure the resistance at the output. The value has to be high ohmic.
• Select
yes
to repeat the test,
no
to return to the menu item
SYSTEM settings
.
• Press ENTER.
Special Funct.\SYSTEM settings\Proc. outputs\...\Source item
Tab. 13.1: Configuration of the binary outputs
source item list item output
Limit R1 limit message ( Alarm Output R1 )
Impuls from abs(x) pulse without sign consideration
from x > 0 pulse for positive measured values of the
volumetric flow rate
from x < 0 pulse for negative measured values for the
volumetric flow rate
Special Funct.\SYSTEM settings\Proc. outputs\...\Output Test B1\
Opto-Relay OFF
Special Funct.\...\B1 Output Test\B1=ON\Again?