FHF ExResistTel IP2/IP154, Руководство по эксплуатации

Страница: 356 / 412

Page 356 Manual ResistTel IP2 / IP152
ExResistTel IP2 / IP154
4.11.1.4 Commands
The actual configuration can be read with Administration->Diagnostics->Config-Show
via the web interface or with the command:
config show
If an option shall be appended to a configuration line only, then this can be done
with the following command:
config add /option <parameter>
If an option shall be appended to a configuration line, this can be done with the
following command also. Pay attention appending an option that between "/option"
and the text before a space character must be entered. Furthermore between the
text "/option" and the text <parameter> a space character must be inserted.
config change <existing configuration line> /option <parameter>
If an option shall be deleted or modified, this can be done with the following
command. In the config change line the configuration line must be always complete.
Missing options and parameters are deleted.
config change <new complete configuration line>
The config change or config add line must be followed by the following commands.
config write
config activate
A successful exercised command will be prompted with an ok.
Depending on the command there may be a request to restart the phone.
4.11.2 Additional Configuration Menus
Additional only for special cases necessary configuration menus are always locked as
default. They can be activated via configuration and will appear in the web interface
of the telephone or in the menu of the phone afterwards.
•
Activation of the menu group Debug:
Append to the configuration line "config change CPU" the option "/debug".