FHF ExResistTel IP2/IP154, Руководство по эксплуатации

Страница: 311 / 412

Manual ResistTel IP2 / IP152 Page 311
ExResistTel IP2 / IP154
determines whether the firmware version 04-5656 was already installed. If this is not
the case, the current firmware is downloaded from the address
192.168.0.10/firm/ip152.bin, the UPDATE/PROT internal variable is overwritten with
04-5656 and, finally, the device is reset as soon at it is not being actively used.
4.9.3.1.9 Boot Command
With the boot command, the boot code is updated and this is done in the same way
as with the prot command.
mod cmd UP0 boot <url> <final-command> <built-serial>
The command
mod cmd UP0 boot http://192.168.0.10/firm/ ireset 205
determines whether the boot code version 205 was already installed. If this is not
the case, the current boot code is downloaded from the address
192.168.0.10/firm/boot152.bin, the UPDATE/BOOT internal variable is overwritten
with the version number of the downloaded boot code (205) and, finally, the device
is reset as soon as it is not being actively used.
Since V6.00 sr2-hotfix3 the commands "reboot" and "ireboot" are available and
should be used to reset the device after boot code update to activate it. The system
is run down the same way as with "reset" and "ireset" but finally a watchdog restart
is forced instead of a soft restart.
4.9.3.1.10 BMC Command (only for DECT Devices)
With the bmc command, the DECT radio code (aka burst mode controller firmware or
BMC code) is updated and this is done in the same way as with the prot command.
mod cmd UP0 bmc <url> <final-command> <build-serial>
The name of the file to use must be given explicitly here (the file name appended to
an <url> parameter ending with a slash (‘/’) has no ".bin" suffix like the delivered
file).
The command
mod cmd UP0 bmc http://192.168.0.10/firm/ccfp1200.bin ireset
PCS04fd