FHF ExResistTel IP2/IP154, Руководство по эксплуатации

Страница: 342 / 412

Page 342 Manual ResistTel IP2 / IP152
ExResistTel IP2 / IP154
Code Name Description
0x000d0001 Fax: Bad signal quality This event is generated if the fax modem in
the gateway receives a distorted analog fax
signal.
The fax demodulator generates an eye
pattern from the fax signal that shows
amplitude and phase. The quality of the eye
pattern is the EQM, a value between 0
(good) and 15 (bad). Values from 10 to 15
generate this event. Changing the fax
transmit level or the receive level of the
analogue interface (if present) should
improve the EQM.
0x000d0002 Fax: Clock offset too
large
Clock offset too large
0x000d0003 Fax: Loss of data More than 5 lost T.38 packets. Indicates a
network problem.
0x000d0004 Fax: Missing Page
Confirmation
Indicates one fax page was not
acknowledged. This can be happen if the fax
modems get out of synchronization, e.g. if
slips on an ISDN interface occur during fax
transmission.
0x000d0005 Fax: General Error Indicates a problem in the T.30 or the T.38
protocol or a timing problem (incompatible
fax devices, end to end delay to high).
0x000e0000 RFP Faults of the group RFP
0x000f0000 Environment Faults of the group Environment