FHF ExResistTel IP2/IP154, Руководство по эксплуатации

Страница: 355 / 412

Manual ResistTel IP2 / IP152 Page 355
ExResistTel IP2 / IP154
4.11.1.1 Changing the Configuration using a PC with an Editor
An easy possibility to configure such options is to edit the configuration using a PC.
The configuration of the phone has to be stored on a PC using the web interface of
the phone. Then the configuration file has to be edited with a text editor. Most of the
options have the format:
•
/option
or
•
/option <parameter>
Pay attention appending an option, that between the text "/option" and the text
before it a space character will be inserted. Furthermore between the text "/option"
and the text <parameter> a space character must be inserted. Sometimes the
searched configuration line exists more than once. In this case the new option must
be appended to the last according configuration line, better it should be appended to
all according configuration lines. After storing of the configuration file, it must loaded
using the web interface of the phone and the phone must be restarted. The
configuration file is secured with a checksum. After editing and loading the
configuration file it may happens, that an error message appears und the instruction
to restart the phone is missing. The error message can be ignored, if there is no
input error. The reset must be executed in all cases.
4.11.1.2 Changing the Configuration using the Address Line of
a Browser
For changing the configuration using the address line of a browser the commands
have to be entered as follows:
http://<IP-address>/!<command>
Important: Between the IP address of the phone and the commands, there must be
a slash and an exclamation mark, exactly.
4.11.1.3 Changing the Configuration using Telnet
First the protocol telnet must be enabled fort he phone. Then it is possible to login
into the phone. Username and password are the same as for the web access. The
commands can be entered after the prompt directly.