FHF ExResistTel IP2/IP154, Руководство по эксплуатации

Страница: 118 / 412

Page 118 Manual ResistTel IP2 / IP152
ExResistTel IP2 / IP154
3.8 Menu User Setup
Call Diversion................
Presence......................
Do not Disturb................
Call waiting: On-def.
Number Present.: On
< User Setup
Figure 85: Menu User Setup
Call Diversion, Presence and Do not Disturb can be set using the sub-menus.
Under call waiting you can set the telephone’s response to inbound calls during an
active call.
•
Call waiting Off:
An inbound call during an active call is only entered in the
Call List. The call is not indicated. The caller hears a busy signal.
•
Call waiting On-def.:
An inbound call during an active call is being
indicated. The caller hears a dial tone (free line signal). The waiting call is
being indicated in the display of the caller. In the receiver, the caller hears a
short acoustic signal.
•
Call waiting On-once:
Contrary to On-def., the caller hears a long acoustic
signal in the receiver.
•
Call waiting On-mute:
Contrary to On-def., the caller hears no acoustic
signal in the receiver.
The waiting call can be accepted by pressing the key (short) and then the key.
The waiting call can be rejected by pressing the key (short) and then the key.
Setting Call waiting:
1. While the telephone is in its initial condition, press the key or .
2. Use the cursor keys to select the
User Setup
menu.
3. Press the key . The screen in Figure 85 appears.
4. Use the cursor keys to select the line
Call waiting
.
5. Press the key repeatedly (if necessary) and select the desired Call waiting
variety.