FHF ExResistTel IP2/IP154, Руководство по эксплуатации

Страница: 295 / 412

Manual ResistTel IP2 / IP152 Page 295
ExResistTel IP2 / IP154
Additional setup possibilities:
Swap Internal/External
Relay Ring Tone Pattern If at Administration/Phone/Preferences (see chapter
4.7.4 on page 288) the option Swap Internal/External
Ring Tone Pattern is activated, this option for the relay
control should be activated too.
4.8.6 Menu Keypad
With the menu keypad the following setups are available:
External push buttons can be connected at the voltaic separated inputs. The push
buttons must be suited for an electrical loading of 60 V DC, 3 mA. All inputs have a
common zero potential.
For each line the operating mode can be programmed separately.
disabled disabled
Function Key, press Fx Function key, with pressing the key the function key Fx will
be executed.
Function Key, release Fy Function key, with releasing the key the function key Fy will
be executed.
Function Key, press Fx
– release Fy Function key, with pressing the key the function key Fx and
with releasing the function key Fy will be executed.
Note
The function keys must be programmed for each used registration at Phone/User-
x/Function-Keys.
Only the telephone ResistTel IP2 / IP152 has voltaic separated input lines.
