FHF ExResistTel IP2/IP154, Руководство по эксплуатации

Страница: 358 / 412

Page 358 Manual ResistTel IP2 / IP152
ExResistTel IP2 / IP154
•
Registration 1 has to be configured as standalone registration, a registration
without using a gatekeeper. Therefore the Primary Gatekeeper Address in
"Registration 1/Registration" has to be configured to 0.0.0.0.
The Name in "Registration 1/Registration" has to be configured with the local
IP address with added telephone number, e.g. "192.168.0.3#22". This enables
the possibility for recall in case of IP address direct dialling, too.
The Protocol in "Registration 1/Registration" has to be configured to H.323.
•
Registration 2 has to be configured as normal registration at a gatekeeper.
The values (IP-address, telephone number have to be configured at
"Registration 2/Registration".
•
Registration 2 has to get access to the local directory. Therefore activate
"Registration 2/Directories/Local/Enable". In the local directory the Calling
numbers and the IP addresses for direct dialling can be stored. On disconnect
of the gatekeeper you dial from directory without problems.
•
Registration 2 becomes the active registration, this registration will be used to
receive and transmit calls normally. The "Phone/Registrations[Id=2]/Active"
has to be set.
4.11.3.2 Test Operation without a Gatekeeper
For test purposes a few telephones can be operated with a small infrastructure (a
PoE switch only) without using a gatekeeper.
Every telephone that should be able of direct dialling of IP addresses is being
configured like the following:
•
The telephones will be operated with locally fixed configured IP addresses.
•
.Registration 1 has to be configured as standalone registration, a registration
without using a gatekeeper. Therefore the Primary Gatekeeper Address in
"Phone/User-1/General" has to be configured to 0.0.0.0.
The Protocol in "Registration 1/Registration" has to be configured to H.323.