FHF ExResistTel IP2/IP154, Руководство по эксплуатации

Страница: 92 / 412

Page 92 Manual ResistTel IP2 / IP152
ExResistTel IP2 / IP154
3.3.11 Initiating a Conference
You can use this function to set up a conference between two lines. To do so, you
need an active line and a line on hold (refer to chapter 3.3.7 "Making second Call"
beginning on page 89).
Torsten 72
anonym
Torsten 72
Peter 36
3party
06.01.10 14:40 0:22
Figure 45: Conference
1. Press the key or the key (short) followed by the key during a call with an
active line and a line on hold.
A conference is set up between the active line and the line on hold. All the
subscribers can now talk with each other (see Figure 45).
2. You can end the conference by pressing the key respective the key (short)
followed by the key or twice the key (short). If you end the conference with
pressing the key or the key (short) followed by the key , the call put on
hold prior to the initiated conference is now on hold again and the previously
active call is active once again. If you end the conference with pressing the key
(short) twice, the call put on hold prior to the initiated conference is now
active and the previously active call is now on hold.
3. To terminate the active line, you must press the key . The connection to the
active conversation partner is terminated. Please note also the tip in chapter
3.3.7.