FHF ExResistTel IP2/IP154, Руководство по эксплуатации

Страница: 291 / 412

Manual ResistTel IP2 / IP152 Page 291
ExResistTel IP2 / IP154
Test Environment Normal Noisy
Background Noise Pink Noise 68 dB 76 dB
Test Tone Duration Ca. 9,5 Seconds Ca. 34 Seconds
Time for Interpretation Min. 22 Seconds Min. 98 Seconds
To start to tests the following tests and options can be selected.
Repeat Test with ‘Too much
Noise Error’ automatically With this option tests with the error message‚’Too
much Noise Error’ will be repeated maximal three
times automatically.
Check Handset Test Handset
Check Handsfree / Speaker 1 Test Handsfree / Speaker 1
Check Handsfree / Speaker 2 Test Handsfree / Speaker 2
The selected tests and test options will be accepted by clicking on the 'OK' button. At
the page Info the tests will be displayed as 'started' respectively 'pending'.
If more than one test is selected, then the test will be executed one after the other.
A test will be started, after the telephone will be in idle state for at least a minute.
During the handset test the handset may be not in the on hook position. If the
handset is off hook and the phone is not in idle state, then you should look at the
calling state at the web page Phone/State/Calls in detail. If the handset is in off hook
position for more than a minute (see Device/Monitoring/Info web page) and the
telephone is in the state 'calling' or 'closing', then you can assume, that the handset
is in off hook position without having a call. With clicking at 'drop' the telephone can
be set to the idle state. After a waiting period of a minute the first pending test will
be started.
If a test will be aborted by an incoming or outgoing call or a restart of the phone,
then the test will be repeated after an idle time of the telephone of at least a minute.