FHF ExResistTel IP2/IP154, Руководство по эксплуатации

Страница: 247 / 412

Manual ResistTel IP2 / IP152 Page 247
ExResistTel IP2 / IP154
For programming a function-key a new sub-window will be opened. On the bottom of
each sub-window there will be different buttons:
OK Button:
The data in the sub-window will be sent to the telephone and the sub-window will be
closed.
Cancel Button:
The sub-window will be closed without sending the data in the sub-window to the
telephone.
Apply Button:
The data in the sub-window will be sent to the telephone and the sub-window will be
kept open.
4.7.1.5.2 Delete Function Key (<empty item>)
A function key can de deleted by selecting by selecting the type to the empty item.
Afterwards a security question appears to delete the function key. The question has
to be answered with OK to delete the function key. With Cancel it will be aborted to
delete the function key.
4.7.1.5.3 Function Key Short Dial
This function enables the user to assign a number to a function key in such a way
that the function key can be used to call a distant end directly.
The following configurable parameters are at the user’s disposal:
Number Remote party number and/or DTMF digits. A comma (,) can be
used to insert a 300ms pause between the digits. This is useful
e.g. for destinations accepting DTMF after connect.
If the destination shall be stored as IP address, the IP address
has to be entered into the field name und the field number has
to be empty.
Name Remote party name (H323 ID).