Fantic Motor 125 Series, Руководство пользователя

Страница: 64 / 130

64
!"#$%&
before you check the motor oil, wait a
few minutes for it to settle. Do not screw in the
motor oil fill cap (dipstick) “1” when checking
the oil.
'##$!#("!%
- The engine oil also lubricates the clutch. The
wrong oil or chemical additives may cause
the clutch to slip. Therefore, do not add
chemical additives or use motor oil a grade
of “CD” “C” or higher and do not use oil with
the label “ENERGY CONSERVING II” “d”.
- Do not allow foreign material to enter the
crankcase.
Start the engine and let it warm up for a few
minutes. Then turn it o ff .
Check the motor oil again.
!"#$%&
before you check the motor oil, wait a
few minutes for it to settle.
)*'!+(!+&,"#"-&"(.
Start the engine and let it warm up for a few
minutes. Then turn it o ff .
Place a container under the oil drain bolt.
Remove the motor oil fill cap (dipstick) “1”, the
motor oil cap “2”, the O-ring “3”, the spring “4”
and the motor oil filter.
Completely drain the motor oil from the crank-
case.
(/& 012& / 3 4025& 6478& 922:7& 08& ;2& 52<46=2:>& <58?
=22:&67&/8448@7%
remove the cover of the oil filter “1” and the oil
filter “2”. Install a new O-ring “3”. Then install the
new oil filter and the oil filter cover.
Check motor oil filter. If it is dirty it will need to
be cleaned.
Re-install the spring, the new O-ring and the oil
drain cap.
Fill the crankcase with the recommended
amount of motor oil.
',"A!#&"B&"(.
#8064&CD69030E%&FGFH.&IFGJJ&AK&C0L&IFGMF&(N<G&C0L
O3018D0&=169P39P&012&834&/34025%
MGQH.&IFGMM&AK&C0L&IMGRS&(N<G&C0L
)169P39P&012&834&/34025%
FGMM.&IFGMT&AK&C0L&IMGRR&(N<G&C0LG
&&
Re-insert the motor oil fill pipe cap.
Start the engine and let it warm up for a few min-
utes. Then turn it o ff .
Check the engine for leakage of motor oil. Refer to
“LEVEL CHECK” for the motor oil level.
Also check the motor oil pressure.