Extreme Networks BlackDiamond 8810, Руководство по установке оборудования

Страница: 81 / 162

Installing and Removing MSMs
Extreme Networks Consolidated XOS Hardware Installation Guide
81
NOTE
Any unoccupied module slot in the chassis should have a blank faceplate installed to ensure satisfactory
protection from EMI and to guarantee adequate airflow through the chassis.
4 Place the ESD bag containing the MSM on a flat ESD surface, clean from any debris.
5 Break any seals on the bag.
6 Open the ESD bag and firmly grasp the rail of the module.
7 Holding the rail of the module, pull the ESD bag off the module.
NOTE
By holding the rail of the module and pulling the ESD module off the module, you will prevent damage to the
module that might be caused by sliding the module on the ESD surface.
8 Check the connectors for dust and packing materials.
CAUTION
To prevent ESD damage, handle the module by the metal panel edges only. Never touch the components on the
PCB or pins on any of the connectors.
9 Ensure that the MSM is vertical as shown in Figure 39 , with the:
●
Module name at the top
●
PCB to the right
●
Ejector/injector levers extended
Figure 39: MSM prior to insertion in a BlackDiamond 10K system chassis
a Slide the MSM into the appropriate lettered slot of the chassis, until it makes contact with the
backplane.
EX_016
Module status LEDs
Module reset button
Console port
Management port
Compact flash