Extreme Networks BlackDiamond 8810, Руководство по установке оборудования

Страница: 91 / 162

I/O Modules
Extreme Networks Consolidated XOS Hardware Installation Guide
91
10G6X Module
Figure 43 shows the 10G6X module.
Figure 43: 10G6X module
The 10G6X module has six unpopulated XENPAK-based 10 Gigabit Ethernet ports.
If you have one MSM installed, all ports on the 10G6X module are switched through that MSM. If you
have two MSMs installed, the top three ports on the 10G6X module are switched through the MSM in
slot A, and the bottom three ports are switched through the MSM in slot B during normal operation.
The default configuration of the 10G6X module is as follows.
All ports:
• Are added to the default VLAN as untagged.
• Inherit the properties of the default VLAN (for example, protocol type and VLANid).
10G6X LEDs
The 10G6X module has the following LEDs:
●
Module status
●
Port status
For information about the LEDs and their activity on the 10G6X module, see “I/O Module LEDs” on
page 93 .
EX_006
Module status LEDs
10 Gbs ports