Extreme Networks BlackDiamond 8810, Руководство по установке оборудования

Страница: 86 / 162

BlackDiamond 10K Series I/O Modules
Extreme Networks Consolidated XOS Hardware Installation Guide
86
NOTE
See the ExtremeWare XOS Concepts Guide and the ExtremeWare XOS Command Reference Guide for more
information about configuring I/O modules.
G60T Module
Figure 40 shows the G60T module.
Figure 40: G60T module
The G60T module has 60 autosensing 10/100/1000BASE-X ports that use standard RJ-45 connectors. If
you have one MSM installed, all ports on the G60T module are switched through that MSM. If you have
two MSMs installed, the top 30 ports on the G60T module are switched through the MSM in slot A, and
the bottom 30 ports are switched through the MSM in slot B during normal operation.
The default configuration of the G60T module is as follows. All ports:
●
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
●
Operate in autonegotiation mode
G60T LEDs
The G60T module has the following LEDs:
●
Module status
●
Port status
●
Port speed
For information about the LEDs and their activity on the G60T module, see “I/O Module LEDs” on
page 93 .
EX_004
Module status LEDs
RJ-45
connector
ports