manualshive.com logo in svg

Emerson Affinity, Руководство пользователя

Jetta Affinity - отличное решение для вашего автомобиля. Здесь вы можете скачать бесплатно руководство пользователя и инструкцию по установке. Эти полезные руководства помогут вам разобраться с вашим товаром и использовать его на полную катушку. Скачайте их с manualshive.com.

Поделиться
Скачать
background image

Safety 

Information

Product 

Information

Mechanical 

Installation

Electrical 

Installation

Getting 
Started

Basic 

parameters

Running 

the motor

Optimization

SMARTCARD 

operation

PC tools

Advanced 

parameters

Technical 

Data

Diagnostics

UL Listing 

Information

Affinity User Guide                                                                                                                                                                                 

137

Issue Number: 5                                                          www.controltechniques.com

This parameter is updated once per second or once per Onboard PLC 
program scan whichever is the longest. If more than one program scan 
occurs within the one second update period the parameter shows the 
average scan time. If the program scan time is longer than one second 
the parameter shows the time for the last program scan. 

The Drive Onboard PLC program first run parameter is set for the 
duration of program scan from the stopped state. This enables the user 
to perform any required initialisation every time the program is run. This 
parameter is set every time the program is stopped.

10.2.5     Onboard PLC trips

The following trips are associated with the Onboard PLC program.

10.2.6     Onboard PLC and the SMARTCARD

The Onboard PLC program in a drive may be transferred from the drive 
to a SMARTCARD and vice versa.
•

To transfer an Onboard PLC program from the drive to a 
SMARTCARD, set Pr 

xx.00

 to 5yyy and reset the drive

•

To transfer an Onboard PLC program from the SMARTCARD to a 
drive, set Pr 

xx.00

 to 6yyy and reset the drive.

(Where yyy is the data block location, see Table 9-1

SMARTCARD data 

blocks

on page 130 for restrictions on block numbers).

If an attempt is made to transfer an Onboard PLC program from a drive 
to the SMARTCARD when the drive contains no program, the block is 
still created on the SMARTCARD but it will contain no data. If this data 
block is then transferred to a drive, the destination drive will then have 
no Onboard PLC program. 
The smallest SMARTCARD compatible with Affinity has a capacity of 
4064 bytes and each block can be up to 4064 bytes in size. The 
maximum size of a user program is 4032 bytes so it is guaranteed that 
any Onboard PLC program downloaded to a Affinity will fit on to an 
empty SMARTCARD. A SMARTCARD can contain a number of 
Onboard PLC programs until the capacity of the card is used.

10.3      CT Energy Savings Estimator

CT Energy Savings Estimator is a Windows

™

 based tool for estimating 

electrical energy consumption and savings for fan and pump 
applications. It provides a comparison of energy usage for various 
control methods such as Variable Frequency Drive, outlet dampers, inlet 
vanes and valves.
The results, displayed in graphical and text format, are provided for 
energy usage, savings and payback. This data can be incorporated in 
customer reports which can be viewed, printed, e-mailed as a PDF file or 
exported to a file in PDF, RTF, HTML, GIF, BMP, JPG, TIF format. 
CT Energy Savings Estimator can be found on the CD supplied with the 
drive. 

System Requirements

•

Personal Computer or Notebook (Pentium or faster) running 
Windows 2000/XP/Vista (32 bit)/Vista (64 bit)/ Windows 7 (32 bit)/
Windows 7 (64 bit) 

•

Memory: 256 MB RAM for Windows 2000/XP 

•

Monitor: VGA or higher with a minimum resolution of 800x600 (256 
colors) 

•

Hard Disk: 15MB Available Disk Space 

•

Windows-compatible ink jet or laser printer for printing of reports 
(optional) 

•

Application Programming Interface (MAPI) to e-mail report (optional) 

10.3.1     Installation

To install CT Energy Savings Estimator, insert the CD and run setup.exe 

10.3.2     Functions

The following is a summary of the functions available. Further 
information is available in the help facility provided.

Program set up:

 allows changes to the following parameters

•

Preferences: set up customer report information (name, address, 
contact, logo) enable use of pre-printed letterhead, enable welcome 
start-up message, 

•

Efficiency set up: efficiency data for VFD, damper, inlet vane and 
valves 

•

Custom efficiency: efficiency data for custom applications 

•

Report Layout: company address and logo

Data entry:

 allows entry of the following data

•

Customer information - customer name, address, telephone e-mail.

•

System data: 
•

Operation timescales

•

Motor power/efficiency

•

Unit energy cost

•

Company incentive cost

•

Inverter costs

•

Duty cycle percentages

Results:

 data representation

•

Energy Estimation - Display energy cost, savings and pay back data

•

Energy Graphs - Graphical representation of flow vs Cost, hours and 
time

•

Report - Review/print/export report, e-mail report as PDF file

11.50

Drive Onboard PLC program average scan time

RO

Uni

NC

PT

Ú

0 to 65,535 ms

š

11.51

Drive Onboard PLC program first run

RO

Bit

NC

PT

Ú

OFF (0) or On (1)

š

Trip

Diagnosis

UP ACC

Onboard PLC program: Cannot access Onboard PLC 
program file on drive

98

Disable drive - write access is not allowed when the drive is 
enabled.
Another source is already accessing Onboard PLC program - 
retry once the other action is complete.

UP div0

Onboard PLC program attempted divide by zero

90

Check program

UP OFL

Onboard PLC program variables and function block calls 
using more than the allowed RAM space (stack overflow)

95

Check program

UP ovr

Onboard PLC program attempted out of range parameter 
write

94

Check program

UP PAr

Onboard PLC program attempted access to a non-
existent parameter

91

Check program

UP ro

Onboard PLC program attempted write to a read-only 
parameter

92

Check program

UP So

Onboard PLC program attempted read of a write-only 
parameter

93

Check program

UP udF

Onboard PLC program undefined trip

97

Check program

UP uSEr

Onboard PLC program requested a trip

96

Check program

Содержание Affinity



















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Affinity

UE 120 Series Installation And Maintenance Instructions preview
120 Series
Бренд: UE Страницы: 4
XBOX 360 Manual preview
360
Бренд: XBOX Страницы: 7
ABB HF Series Manual preview
HF Series
Бренд: ABB Страницы: 63
Aaeon COM-KB Manual preview
COM-KB
Бренд: Aaeon Страницы: 76
H3C S9500E Series Card Manual preview
S9500E Series
Бренд: H3C Страницы: 5
H3C WX1800H series Command Reference Manual preview
WX1800H series
Бренд: H3C Страницы: 27
H3C WX3500H series Installations preview
WX3500H series
Бренд: H3C Страницы: 4
H3C WX5540H Installation Manual preview
WX5540H
Бренд: H3C Страницы: 54
H3C LSWM1WCM10 Manual preview
LSWM1WCM10
Бренд: H3C Страницы: 10
H3C LSQM1WCMB0 Quick Start Manual preview
LSQM1WCMB0
Бренд: H3C Страницы: 10
Samson 3756 Mounting And Operating Instructions preview
3756
Бренд: Samson Страницы: 56
EasyIO FG-20 Installation Manual preview
FG-20
Бренд: EasyIO Страницы: 17
D+H RZN 4402-K V2 Original Instructions Manual preview
RZN 4402-K V2
Бренд: D+H Страницы: 32
Ultraflex B47 Installation Instructions Manual preview
B47
Бренд: Ultraflex Страницы: 7
Coccolle gire plus Manual preview
gire plus
Бренд: Coccolle Страницы: 11
Ascon tecnologic Y39 Operating Instructions Manual preview
Y39
Бренд: Ascon tecnologic Страницы: 16
KIOUR FA3F Quick Start Manual preview
FA3F
Бренд: KIOUR Страницы: 3
Topway HMT028ATB-C User Manual preview
HMT028ATB-C
Бренд: Topway Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды