64
Parameter setting
Actuators KNX S4-B10, KNX S2-B6 and KNX S1-B2 230 V
Status: 18.04.2017 • Technical changes and errors excepted.
step operation the temperature/humidity deviation is checked after a specified period
of time, and may be increased/decreased by one step.
4.3.1.6. Scenes (drives)
The ‘Scenes’ menu item only appears in the drive settings (shutters, blinds, awnings
or windows) if ‘Use scenes: yes’ is selected. For each drive, you can save different mo-
vement positions as scenes, and be able to call them via the bus. 16 scenes are availa-
ble per drive.
You can assign each activated scene its own scene number, regardless of the intenal
number of the actuator.
4.3.1.7.Button inputs (drives)
The inputs 1 and 2 of KNX S1-B2 and the inputs from 3 upwards of KNX S2-B6 and KNX
S4-B10 are designated by default for operating the devices on the outputs (channels),
and are therefore parametrized directly in the settings of the output channels. They can
be used as actuator button or bus button, for connected drives the inputs 1 (KNX S1-
B2), 3, 5, 7 and 9 can be used
alternatively
for zero position sensors.
Window opening
absolute in % • incrementally
Window opening in %
(only if "window opening is absolute in %")
1...100
incrementally by (in %)
(only if "window opening is in increments")
1...100; 25
every (in minutes)
(only if "window opening is in increments")
1...60; 3
Use scenes
no • yes
Scene number
0...127
Shutter position in % or
Blind position in % or
Awning position in % or
Window position in %
0...100; 50
Slat position in %
(only for shutters)
0...100; 70
Operating mode
Use input 3 / 5 / 7 / 9
• no
• as a bus button
• as an actuator switch
• as a zero position sensor
Use input 4 / 6 / 8 / 10
• no
• as a bus button
• as an actuator switch
Содержание KNX S1-B2 230 V
Страница 2: ......
Страница 6: ...4 Clarification of signs...
