Elsner KNX S1-B2 230 V, Установка и настройка

Страница: 42 / 77

40 Parameter setting
Actuators KNX S4-B10, KNX S2-B6 and KNX S1-B2 230 V
Status: 18.04.2017 • Technical changes and errors excepted.
Configuration options for inputs:
Input as bus button
If an input is used as a free bus button, it will send a previously set value to the bus
when activated. In the program file of the actuator different parameters are integrated
for frequently needed bus functions. Thus, the inputs can easily be configured as a
switch, drive control, dimmer for sending values and for the scene calls.
KNX S4-B10 KNX S2-B6 KNX S1-B2
Input 1 Input 1 – • Bus button
Input 2 Input 2 – • Bus button
Input 3 Input 3 Input 1 • Actuator button for output channel A
• Bus button
• For drives also zero position sensor
Input 4 Input 4 Input 2 • Actuator button for output channel A
• Bus button
Input 5 Input 5 – • Actuator button for output channel B
• Bus button
• For drives also zero position sensor
Input 6 Input 6 – • Actuator button for output channel B
• Bus button
Input 7 – – • Actuator button for output channel C
• Bus button
• For drives also zero position sensor
Input 8 – – • Actuator button for output channel C
• Bus button
Input 9 – – • Actuator button for output channel D
• Bus button
• For drives also zero position sensor
Input 10 – – • Actuator button for output channel D
• Bus button
Operating mode
Use input 1 No • as bus button
Use input 2 No • as bus button
Use input 3 and 4 See parameterization channel A –
button inputs
Use input 5 and 6 See parameterization channel B –
button inputs
Use input 7 and 8 See parameterization channel C –
button inputs
Use input 9 and 10 See parameterization channel D –
button inputs