55
Parameter setting
Actuators KNX S4-B10, KNX S2-B6 and KNX S1-B2 230 V
Status: 18.04.2017 • Technical changes and errors excepted.
4.3.1.3.Automation - external
The ‘External automation’ menu item appears if the external automation is selected in
‘Control’. In this case, the position memory can be activated for the automatic mo-
vement. The position set here can be overwritten via a learning object at any time. The
memorised position can be retrieved again at a later time. For configuration options,
see Chapter ‘Manual’ on Page 31.
4.3.1.4.Automatic - internal for shading (drives)
The menu item "Automatic internal" appears if internal automatic is selected for "con-
trol". The internal automatic functions take into account the brightness/position of the
sun, outdoor and indoor temperature and allow a time and dimming control. A shading
position can be specified or taught.
To be able to fully utilize the internal shading automatic, information about brightness/
twilight, outdoor and indoor temperature, time and position of the sun must be present
in the bus system.
Outdoor temperature block:
The input object "outdoor temperature block" is linked with the output object of a tem-
perature sensor. The input object can be a 1bit object (smaller or larger than a th-
reshold value), as well as a 16bit object (measurement value).
1 bit input object:
Shading is allowed if the bit is 0 and blocked if the bit is 1.
16 bit input object:
Use different positions for object values 0
and 1
no • yes
(if ‘yes’ is selected, there will be a division
into positions for object value 0 and object
value 1)
Position in %
0...100
Allow calling via command sequence: long-
term = 1, short-term = 1
no • yes
Use learning object for new position
no • yes
Transfer when programming
(when learning object is used)
• all parameters
• changed parameters only
Use automatic blocking object
no • yes
Use automatic blocking object
yes
Type of temperature input object
1 bit • 16 bit
Type of temperature input object
1 bit
Type of temperature input object
16 bit
Threshold value in 0.1°C
-300 … 800; 50
Содержание KNX S1-B2 230 V
Страница 2: ......
Страница 6: ...4 Clarification of signs...
