Elsner KNX S1-B2 230 V, Установка и настройка

Страница: 12 / 77

10 Installation and start-up
Actuators KNX S4-B10, KNX S2-B6 and KNX S1-B2 230 V
Status: 18.04.2017 • Technical changes and errors excepted.
2.2.2. Device Design KNX S2-B6 230 V
The device is designed for series installation on mounting rails and occupies 6 width
units.
1) –/N (bridged internally with terminal No. 5). When an external auxiliary voltage is used
(6...80 V DC, 6...240 V AC), one of the –/N terminals is to be assigned with – or N
2) Free contacts (bridged internally)
3) Programming LED and programming buttons (PRG)
4) Bus terminal slot (KNX +/-)
5) –/N (bridged internally with terminals No. 1)
6) Binary inputs 1-2 (two bridged connections)
7) Internal auxiliary v 24 V DC. Only for binary inputs!
Do not assign any external voltage!
8) Binary inputs 3-6
9) Up/Down button pairs and LEDs channel A-B
10) Mains LED (Power), mode status display. See “Indication of operation mode with the
Power LED” on page 11.
11) Operating voltage input 230 V AC L/N/PE
12) Output A1 - A2: "Up"-"Down" respectively "Device1"-"Device2", max. 4 A
13) Output B1 - B2: "Up"-"Down" respectively "Device1"-"Device2", max. 4 A
14) All terminals L, N , PE of the lower connection strip are bridged internally with „main L,
N, PE“.
3
4
5 7
9
10
1 2
6 8
11
12 13 14 14
No. 12-13
in total
max. 10 A