Elsner KNX S1-B2 230 V, Установка и настройка

Страница: 68 / 77

66 Parameter setting
Actuators KNX S4-B10, KNX S2-B6 and KNX S1-B2 230 V
Status: 18.04.2017 • Technical changes and errors excepted.
4.3.2.1.Connection (switch functions)
The menu item "connection" appears only for the settings for the switch function chan-
nel if selected "Use switch functions: Yes".
In the connection object ("Channel X connection") different communication objects can
be linked with AND or OR. E.g. a light can only be switched on if the button input is
active AND twilight is active.
4.3.2.2.On/Off switch delays, time switching (switch functions)
The menu item appears only for the settings for the switch function channel if a time
function is chosen. The menu item has the same name as the selected function.
With the switch on and off delay, a switch can be used for example for a HVAC unit and
light. Through the switch on delay the ventilator will only start if the light has already
been turned on for a few minutes. The switch off delay effects that the ventilator will
follow up if the button was operated again and the light is already off.
The staircase timer function makes sure for example that the light is on for a defined
period of time and then turns off automatically.
Relay operation closer • opener
Behavior for bus voltage failure • no change
• opened
• closed
Behavior for bus voltage return • as before bus voltage failure
• no change
• opened
• closed
Behavior after reset and ETS download • opened
• closed
Use status object • no
• as an active feedback object
• as a passive status object
Use connection function
(see
Connection (switch functions) , page
66)
no • yes
Use time function
(see
On/Off switch delays, time switching
(switch functions) , page 66)
• no
• as a switch on delay
• as a switch off delay
• as a switch on and off delay
• as a staircase light timer
Use blocking object no • yes
Use scenes no • yes
Connection type AND • OR
Value of the connection object
after bus voltage returns 0 • 1