![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633115.webp)
114
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
WGT temperature sensor:
Remote control Remo 8
WL400, WL800, WL610, WL305 roof vent
Radio module type
“WGT“ display
Name
To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the
OK
key.
2.4. Input keyboard for names and codes
Radio status
Radio status display
WGT status
Display of serial number and version
Measured values
Display of current value.
To adjust the sensor, press the
Adjust
button. Adjust
the value for "Displayed temperature". Confirm your
entry using the
OK
key.
Settings
Press the
Manual Menu
button to set if the indoor sen-
sor shall be displayed in the manual menu. Confirm
your choice using the
OK
key.
Radio module type
“Remo 8“ display
Radio module name
To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the
OK
key.
2.4. Input keyboard for names and codes
Serial number
Display of serial number
Drive groups
Press the
Allocate
button to allocate drives and
devices to the manual sender channels.
Select channel for the manual sender (channels 1 to 8).
Select the drives and/or devices to be controlled by the
channel. Confirm your entry using the
OK
key.
ATTENTION!
Only drives/units with the same function should be controlled together using a
single transmitter channel (e. g. blinds or windows alone).
Radio module type
“WL305/610/400/800“ display
Radio module name
To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the
OK
key.
2.4. Input keyboard for names and codes
Radio status
Radio status display
WL305/610 status
Display of serial number, period, flap movements,
version