![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633117.webp)
116
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
RF relay
RF-MSG motor control devices
Delete wireless connection
Press
Delete
if you want to delete the connection to a wireless participant. All wireless
participants available are shown:
Radio module type
“RF-Relais“ display
Type of automatic
To set what shall be connected to the RF relay, press
the button. Select the type of automatic regime (heat-
ing, cooling, alarm, light, roof gutter heating, supply air,
dimmer or none). If "Dimmer" or "None" is selected, the
device can be switched on and off only by hand, there
are no automatic regime menus. Confirm your entry
using the
OK
key.
Radio module name
To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the
OK
key.
2.4. Input keyboard for names and codes
Radio status
Radio status display
RF relay status
Display of Serial number and version
Settings
Press the
Manual Menu
button to set if the device
shall be displayed in the manual menu. Confirm your
choice using the
OK
key.
Radio module type
“RF-MSG“ display
Type of automatic
To set what shall be connected to the RF-MSG relay,
press the button. Select type of automatic regime (awn-
ing, window, sky roof, blinds). Confirm your entry
using the
OK
key.
Radio module name
To change the name, press the button showing device
identification. Enter the required name in the box which
appears. Confirm your entry using the
OK
key.
2.4. Input keyboard for names and codes
Radio status
Radio status display
RF-MSG status
Display of Serial number, version and RF-Router if
applicable
Other settings
Basic settings of drive, seting of movement times, MSG
control.
6.1. Set up drives and drive groups, page 94
(MSG control and zero position movement time/dead
time can be set as of RF-MSG version 3.4)
Delete