![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633096.webp)
95
Installation
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Connect devices to the multifunctional inputs
Devices with potential-free contacts can be connected to the multifunctional inputs.
These can be alarm-reporting devices, such as motion-detectors or smoke detectors
(with relay output) or another device with a potential-free contact, which is then crucial
for the alarm function.
A smoke alarm at the multi-functional input does not fulfil the
requirements for a smoke alarm system.
A heating or cooling plant operated independently of the control system can be con-
nected to a multifunction input using its potential-free contact. Through the closed re-
lay, the device signals the control that it is currently heating or cooling and the control
activates the ventilation block.
A closed contact on the multifunction input can be used to test if a sliding door is
closed.
An impulse transmitter for the automatic reset can also be connected here, e.g. a sen-
sor device or an alarm unit (impulse when activating).
4.4.3. Connecting drives and devices wirelessly
Connecting drives and devices wirelessly is achieved by means of an Elsner wireless
modules (RF relay, RR-MSG). Elsner Elektronik ventilation devices can be learned into
the control system without any additional equipment. Please observe the installation
instructions relating to the wireless relays, motor control devices and ventilation devic-
es.
6.1. Wireless connections