![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633126.webp)
125
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Press
Reset
and the control system restarts.
Factory settings
ATTENTION
Material damage due to inappropriate use of the service
functions!
In normal operation of the control unit, the service settings are not used.
By resetting to the factory defaults all basic and automatic settings will be deleted. The
control unit will once again be in the condition it was when delivered.
The Factory settings can be accessed by pressing the buttons:
Select
Factory Defaults.
Enter the code “81” via the keypad which appears and con-
firm with the
OK
button. The factory settings will be loaded and the control system re-
started.
Internal area
In the internal area, basic data of the device can be modified. You are not authorised
to change this.
6.2.3. Access code
In the
System > WS1 / WS1000 Settings > Access code
menu area you can set
an access code which locks the “Installation” and “Automatic Settings” menus against
unauthorised changes. Manual operation of the control system remains possible at
any time.
The access code settings can be accessed by pressing the buttons:
Here you can enter, change and delete a code.
Reset
WS1 / WS1000
Settings
Service
System
Factory Defaults
WS1 / WS1000
Settings
Access Code
System