![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633048.webp)
47
Automatic settings
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
When precipitation begins, depending on the amount of rain and
the temperature, some time may pass before the precipitation is
recognised by the weather station. The operating time taken to
close the window must also be included in this calculation.
Moisture-sensitive objects should therefore not be placed within the
area of the automatic window.
Press the button to enable or disable gap opening when a rain alarm triggers. The func-
tion is only active if the rain alarm is switched on. With gap opening, the window can
be opened a little despite a rain alarm.
Enable: If gap opening should be active when it rains, select
Yes
.
Disable: If the window should be completely closed when there is rain, select
No
(de-
fault setting).
Confirm your setting with the
OK
button.
Please note that gap ventilation is not possible if the MSG Control has been activated
(signal duration set to permanent) in the basic settings of the window in the installation
menue.
6.1. Set up drives and drive groups
Press the button to set the movement position for the opening when a rain alarm trig-
gers. The function is only active if the gap ventilation is switched on.
With the arrow keys, specify the movement position in % (0% = closed, 100% = fully
open). Default setting: 5%.
Confirm your setting with the
OK
button.
Press the button to enable or disable the switchover to automatic mode at a set point
in time, or following a manual intervention.
The general Automatic Reset occurs daily at the same time.
Switching on: To set the window to Automatic at a set point in time, select
Yes
(this is
the default setting).
Switching off: To switch off the window’s Reset function, select
No
.
Alternatively, the automatic function can be reactivated at a set time following a man-
ual intervention.
Switching on: To perform an Automatic Reset after a manual intervention, select
Yes
.
Gap Ventilation
Gap Position
Automatic Reset