![background image](http://html1.mh-extra.com/html/elsner-elektronik/60121/60121_installation-and-operation-manual_2396633073.webp)
72
Installation
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Device design
ATTENTION!
Even a few drops of water can damage the device electronics.
•Do not open the device if water (e.g. rain) can get into it.
Preparation for installation
Fig. 5
1 GPS receiver in lid
2 Brightness measurement
3 Precipitation sensor in lid
4 Temperature measurement
5 Wind measurement
ATTENTION!
Sensitive wind sensor.
•Remove the protective transport sticker after installation.
•Do not touch the sensor on the wind measuring element (no. 5).
1
2
4
3
5
Fig. 6
Slacken both screws on the lid (top) and low-
er part (bottom) with a Phillips screwdriver.